PT100 temperature probe is designed for measurement of air, surface ground, soil and water temperature.

Temperature probe PT100D is designed for ground and soil temperature measurements.

The new generation of Relative Humidity and Temperature Probes RHT175, developed and manufactured by MicroStep-MIS, provides reliable and accurate relative humidity and ...

Barometer MSB181, developed and manufactured by MicroStep-MIS, is designed for use in meteorological and agrometeorological applications requiring accurate measurement.

Digital Barometer MSB780 developed and manufactured by MicroStep-MIS, is designed for use in professional meteorological and aviation applications that require reliable and highly ...

MSB780X TS is a high precision barometer suitable for usage in the field. It is ideal for on-site comparisons of pressure readings. With optional probe, it is also possible to ...

Modular and scalable platform for additional sensors and future upgrades

Mobile, automatic, highly reliable, weather equipment measurement Marwel is a portable device used for hand-held, mobile, back-up, and temporary automatic weather ...

The MicroStep-MIS AMS-111 II system is designed for standard, temporary or mobile meteorological stations, as well as for the applications in areas where the commercial power or ...

SAWS 111 is a compact version of data logger designed for standard, temporary and mobile meteorological stations, as well as for those applications where a small footprint but ...

The cloud ceilometer CBME 80 is a standalone instrument designed for fixed and mobile installations where accurate and reliable cloud height information is required.

The LIDAR-based cloud height sensor / ceilometer CHM8k is prepared to work throughout the year and in any climate.

Cloud Camera 360 is a 360° fisheye camera mounted together with pan / tilt head controller. It can be utilized in wide range of environments, where detailed meteorological ...

The communication and reliable data transfer is an important requirement for the modern meteorological station.

MD-24 is an industrial modem with V.22 bis standard for data transfer over long distances (up to 15 km in leased-line connection).

MWT-1 Wind Transmitter is a high-end product designed for data acquisition from wind speed and wind direction sensors, calculations, processing, and sending them to remote places.

Standard 19’’ rackmount 3U unit is designed to house up to twelve (12) MD-24R rack modems. MD-24R is rack version of MD-24 industrial modem with V.22 bis standard for data ...

Multipass developed and manufactured by MicroStep-MIS is designed for connecting industry buses RS232, RS-485/RS-422, SDI-12 and USB.

The SID is a handy device enabling the user to talk with any SDI-12 sensor simply using a PC and terminal program. SID is designed for use by AWS network maintainers and ...

Standard 19’’ rackmount 3U unit is designed to monitor and control RS-232 and/or analog voice lines connected to two independent computers (main and backup). In case of the ...

The USB-SDI / SDI-SIM serves as a converter between the SDI-12 bus and the USB bus. The SDI-12 is a communication standard for interfacing a data recorder with sensors. The ...

Evaporimeter pan and wooden or plastic platform are built to WMO standards for class “A” evaporimeters. The evaporimeter pan is made from stainless steel. Water level sensor is ...

The RQ-30 radar sensor continuously measures the discharge of rivers and channels. The device combines two contact-free radar measurement methods to determine the surface velocity ...

Go straight to work collecting highly accurate stream and river discharge data with the new RiverRay Acoustic Doppler Current Profiler (ADCP).

StreamPro ADCP (Acoustic Doppler Current Profiler) represents a revolutionary advancement in velocity and discharge measurement.

The TSP LOG digitally compensated pressure transmitter combines advanced piezoresistive metal sensor and transmitter design.

The TSP digitally compensated pressure transmitter combines advanced piezoresistive metal sensor and transmitter design.

Weather and Hydrological Monitoring

Measurement of Snow Water Equivalent (SWE) and Liquid Water Content (LWC) of snow at any requested locations by a novel GNSS based solution.

Decagon’s LWS leaf wetness sensor is standardized, calibrated, and designed to detect wetness (presence and duration) and ice formation right out of the box. No painting, baking, ...

The BTD-300/350 is a standalone sensor that reliably detects the presence of all forms of lightning to a range of 83 km. The unique quasi electrostatic operating principle ...

The TSS-500 is based on a proven avionics thunderstorm lightning detection processor and was designed to meet the critical need for integrated thunderstorm detection at airports ...

Easy to install and maintain, MM10 meteorological mast is ideal for weather systems. When assembled the whole mast can be installed by four men easily (a concrete foundation is ...

MicroStep-MIS introduces the new superstrong meteorological masts well designed to withstand extreme weather conditions.

Easy to install and maintain, the meteorological masts MM2, MM4, MM5, MM6 and mast for RVR equipment MM2.5F-AV are ideal for weather systems where a 10 m mast is not required.

MetCover 3 Ground Shield is a smaller version of the MetCover 3 Radiation Shield designed for shielding ground temperature sensor.

Radiation shield serves as a shading for temperature or relative air humidity sensing units against solar radiation and rain.

Portable Meteorological Mast

Combined mechanical sensor for measurement of wind velocity and wind direction of the horizontal air flow.

The Wind Monitor is a high performance wind sensor. Rugged, corrosion-resistant construction makes it ideal for a wide range of wind measuring applications.

The sensors are aimed for use in building technology systems, in industrial and wind power plants, in environmental protection - everywhere where precise weather data must be ...

The First Class wind sensors are designed for the acquisition of the horizontal component of the wind velocity in the field of meteorology and environmental measuring technology, ...

Precise timing is a vital requirement of the meteorological measurements. The requirement applies to the weather stations as well as to the data center.

The manifold has been designed to connect multiple barometers into one pressure calibration system. It ensures proper and gas-tight connection within the defined ranges of ...

Matrix is an array of signal relays capable of switching 45 four-wire channels or 15 twelve-wire channels. It is designed to calibrate multiple electronic sensors such as RTD ...

DIN 35 rail mounted overvoltage protection devices are designed for protection of communication lines and sensor inputs/outputs from surges generated in industrial noisy ...

RLSI is an electronic device designed to interface airport runway light system and to provide the RVR system with the current intensities of runway central and/or edge lights to ...

Tipping bucket rain gauges suffer from systematic error dependent on rainfall intensity. The higher intensity, the more error on collected rainfall can be observed. At the highest ...

The acquisition comprises the types of precipitation, intensity and the spectrum.

A principle of the rain gauge function lies in the utilization of “tipping bucket” mechanism to get electrical pulses in dependence on a precipitation quantity.

The MR3 is non-heated rain gauge intended for a liquid precipitation measurement and the MR3H is heated rain gauge intended for a liquid and solid precipitation measurement.

Developed and manufactured by MicroStep-MIS, PDS is a low-cost, maintenance free drip sensor for caves based on 24 GHz Doppler radar.

Total Rain weighing Sensor TRwS with its original mechanical and electronic design is excellent tool to measure all types of precipitation within wide temperature range, harsh ...

MRN01 is dedicated for continuous measurement of 222Rn activity concentration in air and in soil air.

The radiation probe, model RPSG-05, developed and manufactured by MicroStep-MIS, measures gamma radiation dose rate.

This new generation of arc detectors developed at CERN is equipped by four independent photo detectors looking directly into the waveguide covering all directions and two “blind” ...

The active road / runway sensor ARS31 is flush mounted in the pavement and determines the freezing temperature by active cooling and heating of sensor surface.

Passive road sensor IRS31 is flush-mounted in the road. The two part housing design allows the combined sensor / electronics unit to be removed for maintenance or calibration at ...

The NIRS31 is a non-invasive road weather sensor with optical principle. It is mounted several meters above the surface at bridges or masts.

Road / Runway Surface Temperature Probe is designed for surface ground temperature measurements.

The SD-9 developed and manufactured by MicroStep-MIS, is a robust and reliable solution for measuring snow or water height.

The new ThetaProbe has extra features, improved performance and a new design. With its 1 % accuracy the ThetaProbe continues to set the standard for soil moisture as well as ...

The PR2 Profile Probe uses newly patented 1 sensing technology making it possible to measure soil moisture content in a range of soil types and across a wide range of nutrient ...

PT100 temperature probe is designed for measurement of air, surface ground, soil and water temperature.

Temperature probe PT100D is designed for ground and soil temperature measurements.

The SM300 measures soil moisture and temperature with research grade accuracy.

Temperature probe is designed for easy and accurate measurement of soil temperatures in different profiles to a depth of 2 m.

Temperature profile set is designed for easy and accurate measurement of soil temperatures in different profiles at various depths.

CMP and SMP pyranometers are designed for simple maintenance and have a wide range of accessories available. The long operational life and reliability is proven by an MTBF (Mean ...

CSD 3 is used for precise measurement of sunshine duration and normally is measured in hours. It is engineered for continuous outdoor use and is easy to install and service.

The new DustIQ is a sensor without moving parts, does not need cleaning and uses a breakthrough technology to accurately measure soiling. This fundamental new Optical Soiling ...

The main applications for net radiometers are in agro-meteorology, in particular for the study of evapotranspiration and in climatology, meteorology and hydrology for the ...

RT1 is a small, fully weatherproof duo-sensor that independently measures the incoming solar irradiance and the back panel temperature. Thanks to this included back panel ...

RaZON+ is an innovative ALL-IN-ONE solar monitoring system with integrated pyrheliometer, shaded pyranometer, digital data processing, GPS receiver and data logger. It measures ...

SP Lite2 can be used under all weather conditions and is designed for a long operating life with simple maintenance. The sensor receives solar energy from the entire hemisphere in ...

The UV Radiometers represent the state of the art in atmospheric UV instrument design providing a maximum of precision, reliability and long-term stability. The new SUV series ...

The sun tracker provides a stable mounting for the pyrheliometer and moves horizontally (azimuth) and vertically (zenith) to follow the solar arc. Stepping motors controlled by a ...

The Clima Sensor US (Ultrasonic) is the economic alternative for compact acquisition of meteorological values. The sensor works absolutely maintenance-free without movable parts ...

The Ultrasonic Anemometer 2D is designed to detect the horizontal components of wind velocity and wind direction as well as the virtual temperature in two dimensions.

The Ultrasonic Anemometer 3D provides measurement of the wind direction and the wind velocity in all three dimensions. The maintenance-free and wearless anemometer needs no ...

The Ultrasonic Anemometer compact serves for the 2-dimensional acquisition of the horizontal components of the wind velocity, the wind direction and of the acoustic-virtual ...

The WindObserver II provides the best solution on the market for reliable, accurate and cost-effective wind speed and directional measurement.

The Windsonic 75 is a low-cost, high speed anemometer, which utilizes the proven ultrasonic technology to provide wind speed and direction data via one serial or two analogue ...

The Windsonic is a low-cost anemometer utilizing proven ultrasonic technology to provide wind speed and direction data via one serial or two analogue outputs.

The WindSonic M utilizes proven ultrasonic technology that has an established performance over many years of operation.

The ALS-2 is designed to provide an accurate and reliable determination of the amount of background light during all weather conditions.

Revolutionary compilation of industry-proven devices, Phenomen 51 is a highly reliable choice for WMO 4680 table weather codes detection.

Revolutionary compilation of industry-proven devices, Phenomen 61 is a highly reliable choice for WMO 4680 table weather codes detection.

The RWS-20 is designed for use in road applications where accurate and reliable visibility measurements are required. The forward scatter measurement principle and unique design ...

The SWS-050 is optimized for use in applications where accurate and reliable visibility measurements are required.

The SWS-100 is optimised for use in applications where accurate and reliable visibility measurements are required with the addition of fundamental WMO 4680 precipitation codes.

The SWS-200 is the sensor of choice where extended visibility range measurement combined with reliable present weather identification in a compact package is required. The use of ...

The SWS-250 is optimised for use in aviation applications where both visibility and extended present and past weather information is required.

Small, lightweight and rugged the VPF-700 Series offers long term reliability and provides highly accurate measurement under all weather conditions whether the sensor is installed ...

RLS (radar level sensor) is a radar sensor for non-contact water level measurements at surface waters. The sensor uses impulse-radar technology to determine the water level.

The TSP digitally compensated pressure transmitter combines advanced piezoresistive metal sensor and transmitter design.

The VEGAPULS 61 is a sensor for continuous level measurement of liquids under simple process conditions. Due to its simple and versatile mounting options, VEGAPULS 61 offers a ...

The Aquatrak 5000 sensor calculates the true average level even in the presence of waves and surging liquid surfaces. The sensor can be configured via its communication ports for ...

RLS (radar level sensor) is a radar sensor for non-contact water level measurements at surface waters. The sensor uses impulse-radar technology to determine the water level.

Submersible pressure transmitters type TSP-M for level measurement with a membrane separator are intended for very accurate measurement of liquid column of polluted liquids.

A stable and proven system for reliable measurement of waves, sea level and air gap in offshore, maritime and coastal environments.

Deployed long term in-situ or on an ROV, versatile MetrecX can adapt to the focus of each individual project.

The Acoustic Wave and Current profiler (AWAC) performs measurement of wave height, wave direction and the full current profile using the unique acoustic surface tracking (AST) ...

The Aquadopp Profiler measures water column current profiles using acoustic Doppler technology.