Easy to install and maintain, the meteorological masts MM2, MM4, MM5, MM6 and mast for RVR equipment MM2.5F-AV are ideal for weather systems where a 10 m mast is not required.

MicroStep-MIS introduces the new superstrong meteorological masts well designed to withstand extreme weather conditions.

Easy to install and maintain, MM10 meteorological mast is ideal for weather systems. When assembled the whole mast can be installed by four men easily (a concrete foundation is ...

The USB-SDI / SDI-SIM serves as a converter between the SDI-12 bus and the USB bus. The SDI-12 is a communication standard for interfacing a data recorder with sensors. The ...

Standard 19’’ rackmount 3U unit is designed to monitor and control RS-232 and/or analog voice lines connected to two independent computers (main and backup). In case of the ...

The SID is a handy device enabling the user to talk with any SDI-12 sensor simply using a PC and terminal program. SID is designed for use by AWS network maintainers and ...

Multipass developed and manufactured by MicroStep-MIS is designed for connecting industry buses RS232, RS-485/RS-422, SDI-12 and USB.

Standard 19’’ rackmount 3U unit is designed to house up to twelve (12) MD-24R rack modems. MD-24R is rack version of MD-24 industrial modem with V.22 bis standard for data ...

MWT-1 Wind Transmitter is a high-end product designed for data acquisition from wind speed and wind direction sensors, calculations, processing, and sending them to remote places.

MD-24 is an industrial modem with V.22 bis standard for data transfer over long distances (up to 15 km in leased-line connection).

The communication and reliable data transfer is an important requirement for the modern meteorological station.

The WindSonic M utilizes proven ultrasonic technology that has an established performance over many years of operation.

The Windsonic is a low-cost anemometer utilizing proven ultrasonic technology to provide wind speed and direction data via one serial or two analogue outputs.

The Windsonic 75 is a low-cost, high speed anemometer, which utilizes the proven ultrasonic technology to provide wind speed and direction data via one serial or two analogue ...

The WindObserver II provides the best solution on the market for reliable, accurate and cost-effective wind speed and directional measurement.

The Ultrasonic Anemometer compact serves for the 2-dimensional acquisition of the horizontal components of the wind velocity, the wind direction and of the acoustic-virtual ...

The Ultrasonic Anemometer 3D provides measurement of the wind direction and the wind velocity in all three dimensions. The maintenance-free and wearless anemometer needs no ...

The Ultrasonic Anemometer 2D is designed to detect the horizontal components of wind velocity and wind direction as well as the virtual temperature in two dimensions.

The Clima Sensor US (Ultrasonic) is the economic alternative for compact acquisition of meteorological values. The sensor works absolutely maintenance-free without movable parts ...

The First Class wind sensors are designed for the acquisition of the horizontal component of the wind velocity in the field of meteorology and environmental measuring technology, ...

The sensors are aimed for use in building technology systems, in industrial and wind power plants, in environmental protection - everywhere where precise weather data must be ...

The Wind Monitor is a high performance wind sensor. Rugged, corrosion-resistant construction makes it ideal for a wide range of wind measuring applications.

Combined mechanical sensor for measurement of wind velocity and wind direction of the horizontal air flow.

The Aquadopp Profiler measures water column current profiles using acoustic Doppler technology.

The Acoustic Wave and Current profiler (AWAC) performs measurement of wave height, wave direction and the full current profile using the unique acoustic surface tracking (AST) ...

Deployed long term in-situ or on an ROV, versatile MetrecX can adapt to the focus of each individual project.

A stable and proven system for reliable measurement of waves, sea level and air gap in offshore, maritime and coastal environments.

Submersible pressure transmitters type TSP-M for level measurement with a membrane separator are intended for very accurate measurement of liquid column of polluted liquids.

RLS (radar level sensor) is a radar sensor for non-contact water level measurements at surface waters. The sensor uses impulse-radar technology to determine the water level.

The Aquatrak 5000 sensor calculates the true average level even in the presence of waves and surging liquid surfaces. The sensor can be configured via its communication ports for ...

The VEGAPULS 61 is a sensor for continuous level measurement of liquids under simple process conditions. Due to its simple and versatile mounting options, VEGAPULS 61 offers a ...

The TSP digitally compensated pressure transmitter combines advanced piezoresistive metal sensor and transmitter design.

RLS (radar level sensor) is a radar sensor for non-contact water level measurements at surface waters. The sensor uses impulse-radar technology to determine the water level.

The TSP digitally compensated pressure transmitter combines advanced piezoresistive metal sensor and transmitter design.

The TSP LOG digitally compensated pressure transmitter combines advanced piezoresistive metal sensor and transmitter design.

StreamPro ADCP (Acoustic Doppler Current Profiler) represents a revolutionary advancement in velocity and discharge measurement.

Go straight to work collecting highly accurate stream and river discharge data with the new RiverRay Acoustic Doppler Current Profiler (ADCP).

The RQ-30 radar sensor continuously measures the discharge of rivers and channels. The device combines two contact-free radar measurement methods to determine the surface velocity ...

Small, lightweight and rugged the VPF-700 Series offers long term reliability and provides highly accurate measurement under all weather conditions whether the sensor is installed ...

The SWS-250 is optimised for use in aviation applications where both visibility and extended present and past weather information is required.

The SWS-200 is the sensor of choice where extended visibility range measurement combined with reliable present weather identification in a compact package is required. The use of ...

The SWS-100 is optimised for use in applications where accurate and reliable visibility measurements are required with the addition of fundamental WMO 4680 precipitation codes.

The SWS-050 is optimized for use in applications where accurate and reliable visibility measurements are required.

The RWS-20 is designed for use in road applications where accurate and reliable visibility measurements are required. The forward scatter measurement principle and unique design ...

Revolutionary compilation of industry-proven devices, Phenomen 61 is a highly reliable choice for WMO 4680 table weather codes detection.

Revolutionary compilation of industry-proven devices, Phenomen 51 is a highly reliable choice for WMO 4680 table weather codes detection.

The ALS-2 is designed to provide an accurate and reliable determination of the amount of background light during all weather conditions.

The sun tracker provides a stable mounting for the pyrheliometer and moves horizontally (azimuth) and vertically (zenith) to follow the solar arc. Stepping motors controlled by a ...

The UV Radiometers represent the state of the art in atmospheric UV instrument design providing a maximum of precision, reliability and long-term stability. The new SUV series ...

SP Lite2 can be used under all weather conditions and is designed for a long operating life with simple maintenance. The sensor receives solar energy from the entire hemisphere in ...

RaZON+ is an innovative ALL-IN-ONE solar monitoring system with integrated pyrheliometer, shaded pyranometer, digital data processing, GPS receiver and data logger. It measures ...

RT1 is a small, fully weatherproof duo-sensor that independently measures the incoming solar irradiance and the back panel temperature. Thanks to this included back panel ...

The main applications for net radiometers are in agro-meteorology, in particular for the study of evapotranspiration and in climatology, meteorology and hydrology for the ...

The new DustIQ is a sensor without moving parts, does not need cleaning and uses a breakthrough technology to accurately measure soiling. This fundamental new Optical Soiling ...

CSD 3 is used for precise measurement of sunshine duration and normally is measured in hours. It is engineered for continuous outdoor use and is easy to install and service.

CMP and SMP pyranometers are designed for simple maintenance and have a wide range of accessories available. The long operational life and reliability is proven by an MTBF (Mean ...

Temperature profile set is designed for easy and accurate measurement of soil temperatures in different profiles at various depths.

Temperature probe is designed for easy and accurate measurement of soil temperatures in different profiles to a depth of 2 m.

The SM300 measures soil moisture and temperature with research grade accuracy.

Temperature probe PT100D is designed for ground and soil temperature measurements.

PT100 temperature probe is designed for measurement of air, surface ground, soil and water temperature.

The PR2 Profile Probe uses newly patented 1 sensing technology making it possible to measure soil moisture content in a range of soil types and across a wide range of nutrient ...

The new ThetaProbe has extra features, improved performance and a new design. With its 1 % accuracy the ThetaProbe continues to set the standard for soil moisture as well as ...

The SD-9 developed and manufactured by MicroStep-MIS, is a robust and reliable solution for measuring snow or water height.

Road / Runway Surface Temperature Probe is designed for surface ground temperature measurements.

The NIRS31 is a non-invasive road weather sensor with optical principle. It is mounted several meters above the surface at bridges or masts.

Passive road sensor IRS31 is flush-mounted in the road. The two part housing design allows the combined sensor / electronics unit to be removed for maintenance or calibration at ...

The active road / runway sensor ARS31 is flush mounted in the pavement and determines the freezing temperature by active cooling and heating of sensor surface.

This new generation of arc detectors developed at CERN is equipped by four independent photo detectors looking directly into the waveguide covering all directions and two “blind” ...

The radiation probe, model RPSG-05, developed and manufactured by MicroStep-MIS, measures gamma radiation dose rate.

MRN01 is dedicated for continuous measurement of 222Rn activity concentration in air and in soil air.

Total Rain weighing Sensor TRwS with its original mechanical and electronic design is excellent tool to measure all types of precipitation within wide temperature range, harsh ...

Developed and manufactured by MicroStep-MIS, PDS is a low-cost, maintenance free drip sensor for caves based on 24 GHz Doppler radar.

The MR3 is non-heated rain gauge intended for a liquid precipitation measurement and the MR3H is heated rain gauge intended for a liquid and solid precipitation measurement.

A principle of the rain gauge function lies in the utilization of “tipping bucket” mechanism to get electrical pulses in dependence on a precipitation quantity.

The acquisition comprises the types of precipitation, intensity and the spectrum.

The TSS-500 is based on a proven avionics thunderstorm lightning detection processor and was designed to meet the critical need for integrated thunderstorm detection at airports ...

The BTD-300/350 is a standalone sensor that reliably detects the presence of all forms of lightning to a range of 83 km. The unique quasi electrostatic operating principle ...

Decagon’s LWS leaf wetness sensor is standardized, calibrated, and designed to detect wetness (presence and duration) and ice formation right out of the box. No painting, baking, ...

Evaporimeter pan and wooden or plastic platform are built to WMO standards for class “A” evaporimeters. The evaporimeter pan is made from stainless steel. Water level sensor is ...

Cloud Camera 360 is a 360° fisheye camera mounted together with pan / tilt head controller. It can be utilized in wide range of environments, where detailed meteorological ...

The LIDAR-based cloud height sensor / ceilometer CHM8k is prepared to work throughout the year and in any climate.

The cloud ceilometer CBME 80 is a standalone instrument designed for fixed and mobile installations where accurate and reliable cloud height information is required.

MSB780X TS is a high precision barometer suitable for usage in the field. It is ideal for on-site comparisons of pressure readings. With optional probe, it is also possible to ...

Digital Barometer MSB780 developed and manufactured by MicroStep-MIS, is designed for use in professional meteorological and aviation applications that require reliable and highly ...

Barometer MSB181, developed and manufactured by MicroStep-MIS, is designed for use in meteorological and agrometeorological applications requiring accurate measurement.

The new generation of Relative Humidity and Temperature Probes RHT175, developed and manufactured by MicroStep-MIS, provides reliable and accurate relative humidity and ...

Temperature probe PT100D is designed for ground and soil temperature measurements.

PT100 temperature probe is designed for measurement of air, surface ground, soil and water temperature.

Measurement of Snow Water Equivalent (SWE) and Liquid Water Content (LWC) of snow at any requested locations by a novel GNSS based solution.

Weather and Hydrological Monitoring

SAWS 111 is a compact version of data logger designed for standard, temporary and mobile meteorological stations, as well as for those applications where a small footprint but ...

The MicroStep-MIS AMS-111 II system is designed for standard, temporary or mobile meteorological stations, as well as for the applications in areas where the commercial power or ...

Mobile, automatic, highly reliable, weather equipment measurement Marwel is a portable device used for hand-held, mobile, back-up, and temporary automatic weather ...

Modular and scalable platform for additional sensors and future upgrades

The SatMaster is an Iridium/GSM/GPS external antenna based on the very successful OEM IR 3 & OEM IR 4 antenna design.

 Kenwood’s TK-90 is a high-performance HF Transceiver designed to provide user-friendly operation wherever and whenever you need reliable communications. The new,highly compact ...

Excellent Power and Performance High RF Power Output Equipped with a twin final section featuring splitter and combiner circuitry, the TS-480HX can provide up to 200 watts RF ...

Be witness to the evolution of KENWOOD's pride and joy - the TS-590S HF transceiver - pushing performance and technology to its utmost limit, with the receiver configured to ...

The most rewarding results often take place when faced with the harshest and most challenging conditions. There are enthusiasts who know this all too well because of their love of ...

The TS-990S comes equipped with dual receivers for simultaneous reception on different bands, it also features narrow-band roofing filters on the main receiver in a full ...

Whatever the mission, wherever you go, KENWOOD’s TM-281A is a radio you can count on. This compact transceiver delivers powerful mobile performance and such advanced features as ...

High RF Power Output (50W) The TM-V71A provides an impressive 50 watts of RF power (VHF & UHF), with a choice of High/Mid/Low output. Dual Receive on Same Band（V✕V,U✕U） In ...

Equipped with GPS unit. Bringing smart APRS operation closer The GPS unit required for mobile station APRS operation is included in the control panel. Genuine APRS operation is ...

A powerful communications tool in every sense, KENWOOD’s new TH-K20A radio offers 5.5 watts of RF output to ensure reliable performance. Numerous features ensure superb ...

144/220/430 MHz TRIBANDER. Triband Amateur radio packed with convenient features and the advantage of a digital transceiver with D-STAR, and APRS support. Featuring a color ...

Featuring the SiRFstar III™ high-performance GPS receiver, KENWOOD’s TH-D72A dual-band transceiver is compatible with APRS® data communications. Offering position and weather ...

- KENWOOD reliability in a high performance, multi-channel Low-Band base station - Designed with the user in mind - set up and quick adjustments can be made via the pull out ...

Key Features DMR Digital Air Interface 　･Tier II Conventional 　･Conventional IP Network Mixed Mode Operation - Digital / Analog FM RF Power Output 　･VHF: 50 to 5 ...

KENWOOD continues more groundbreaking innovation to the NEXEDGE® digital platform with the introduction of the NEXEDGE® Bridge – a gateway link for networking multiple NEXEDGE® ...

Regional Communications for Your Business is Now Reliable and Affordable with NEXEDGE Digital Networks Immediate, reliable communications is key to your company’s success, ...

Compact, Lightweight Design & Operating Ease Compact enough to carry anywhere with ease, the TK-3230DX has a distinctively ergonomic form that’s handy to hold and operate. It ...

KENWOOD's new ProTalk Series offers a dynamic feature set and solid durability that you have become accustomed to, but has also been improved to offer a larger UHF "bank" of ...

At only 3.9oz, KENWOOD’s PKT-23 UHF two-way radio provides 1.5 watt transmit power, 4 channels, and up to 15 hours of operation. This small but powerful radio is simple to operate ...

- All in one package - Dual Mode NXDN digital & FM Analog - 2watt Output Power - 750mW Speaker Output - 15.5 hour long battery life - 5.6oz light weight - Second PTT - 6CH ...

KENWOOD's new TK-7360HV/8360HU offers extra wideband coverage (UHF: 70MHz) and a wealth of user-friendly features. The bright 10-character, 13-segment LCD clearly displays all ...

Wide Band Operation The TK-7180H/7180/8180H/8180 models feature wide band UHF (70 MHz) and VHF (38 MHz) coverage in one radio model. Mobile Elegance KENWOOD employed premium ...

The 90-Series premium high specification heavy-duty mobiles meet the needs of public safety, public service, government, rail, transportation, utility and private industry sectors ...

KENWOOD's compact mid-tier display portable line offers enhanced features for the budget conscious volunteer public safety, public service, government, industrial and SMR system ...

KENWOOD's TK-2402V/3402U portable radios deliver professional performance, enhanced features such as scan, built-in VOX, a long battery life, as well as a sleek design. Offering 5 ...

The 400/402 Series radios are compact 2 or 5 Watt portable radios designed for local area industrial job site communications. They are available in 4 and 16 channel models in ...

Smart things come in slim packages - as ably demonstrated by KENWOOD's new TK-2360/3360 radios, which offer top-notch performance and a rich feature set - all in a conveniently ...

The new TK-2312/3312 is thin and compact yet packed with features for intuitive operation, impressive performance, and all-weather reliability. Front and side programmable ...

KENWOOD’s TK-2180/3180 defines a bold new standard for portable radio performance, scoring high marks for operating ease, versatility and reliability.

The 90-Series classic premium line is a stalwart mainstay in KENWOOD's high specification and heavy-duty portables. Designed specifically for the public safety, public service, ...

- Two-Slot TDMA (DMR Tier II) - Two-in-one - Digital and Analog - Dual-Slot Direct Mode - Up to two direct-mode subscriber calls can be made simulatneously withing the same ...

- Two-Slot TDMA DMR Tier II - Two-in-One - Digital & Analog FM Analog DMR - Dual-Slot Direct Mode - Call Interruption - Tough All-Terrain MIL-STD C/D/E/F/G IP54/55 - Dust ...

KENWOOD's new 700/800 MHz radios fully expand our P25 Digital Public Safety Radio lineup. The TK-5410 portable and TK-5910 mobile were designed expressly for public saftey ...

KENWOOD's new VHF and UHF P25 Portable Radios feature a compact, rugged design rich with capability and performance. The new TK-5220/5320 portables join KENWOOD's higher tier P25 ...

The TK-5710/5810 premium high specification heavy-duty offers conventional FM and conventional P25 digital operation for present and future interoperability requirements for law ...

KENWOOD's new Phase 2 700/800 MHz radio fully expands our P25 Digital Public Safety Radio lineup. Built on KENWOOD's field-proven TK-5x10 hardware platform with enhanced ...

KENWOOD's 700/800MHz radios fully expand our P25 Digital Public Safety Radio lineup. The TK-5410 portable and TK-5910 mobile were designed expressly for public saftey agencies ...

KENWOOD's new VHF and UHF P25 Portable Radios feature a compact, rugged design rich with capability and performance. The new TK-5220/5320 portables join KENWOOD's higher tier P25 ...

The TK-5210/5310 premium, high specification, heavy-duty portables offer conventional FM and conventional P25 digital operation for present and future interoperability ...

This NEXEDGE® VHF/UHF digital and FM base-repeater has 7X faster processing speed and 15X more memory capacity than prior versions (NXR-700/800). You can support analog/digital ...

KENWOOD has expanded NEXEDGE™ products to 800/900 MHz including the new NXR-900/901 repeater. This will allow users to replace existing 800MHz systems and is designed for use by ...

This NEXEDGE repeater offers 136-174 MHz (NXR-710 model) and 450-520 MHz and 400-470 operation on the NXR-810 version. NXDN Type-D digital trunking adds to its versatility, and, ...

KENWOOD’s groundbreaking NEXEDGE® very narrow band digital technology has expanded to include 800 MHz RF infrastructure and portable and mobile subscriber radios. NEXEDGE® ...

KENWOOD’s groundbreaking NEXEDGE® very narrow band digital technology has expanded to include 800 MHz RF infrastructure and portable and mobile subscriber radios. NEXEDGE® ...

NEXEDGE is KENWOOD’s innovative digital radio system, designed to meet the highest demands of today’s radio system environment and to provide users with a multitude of ...

As smart in operation as they are in looks, these NX-720H/820H radios feature everything necessary to take full advantage of both digital and analog operating modes. Mobile users ...

As smart in operation as they are in looks, these NX-700/800 radios feature everything necessary to take full advantage of both digital and analog operating modes. Mobile users ...

The NX-5000 Series offers unsurpassed interoperability for a wide variety of users as it supports three digital CAIs — NXDN, DMR and P25 (Phase 1 & 2) — plus FM analog in a single ...

This adaptable mobile radio supports both NXDN and DMR digital protocols as well as mixed digital FM analog operation, enabling it to serve with distinction in a wide range of ...

KENWOOD has expanded NEXEDGE™ products to 800 MHz including the new NX-420 portable. This will allow users to replace existing 800MHz systems and is designed for use by utilities, ...

KENWOOD has expanded NEXEDGE™ products to 800 MHz including the new NX-410_NX-411 portable. This will allow users to replace existing 800MHz systems and is designed for use by ...

KENWOOD is pleased to introduce NEXEDGE® technology featuring 6.25 kHz digital narrowband operation. NEXEDGE® was designed to provide advanced communication solutions that meet ...

KENWOOD is pleased to introduce the latest NEXEDGE® portables boasting a newly designed ultra-compact platform with all of the high-performance RF specifications and MILSTD 810 & ...

The new NX-210K2 portable is the latest addition to the NEXEDGE lineup - designed specifically for users preferring a mid-size platform with a larger keypad. The NX-210K2 has the ...

Despite their compact lightweight design, these handheld radios are fully equipped for both digital and analog operating modes. The clear backlit display and ergonomic layout of ...

The NX-5000 Series offers unsurpassed interoperability for a wide variety of users as it supports three digital CAIs — NXDN, DMR and P25 (Phase 1 & 2) — plus FM analog in a single ...

This versatile handheld radio supports both NXDN and DMR digital protocols as well as mixed digital & FM analog operation, enabling it to serve with distinction in a wide range of ...

This versatile handheld radio supports both NXDN and DMR digital protocols as well as mixed digital & FM analog operation, enabling it to serve with distinction in a wide range of ...

The IC-SAT100 utilises SATELLITE PTT (Push-To-Talk) which is a two-way radio system that uses the Iridium® satellite network. It can be used as a communication tool in remote, ...

LTR™/CONVENTIONAL/ DIGITAL* MULTI-MODE LAND MOBILE! Designed and built for advanced communication needs, the IC-F3161 series handhelds are feature-rich with built-in multiple ...

Little Radio, Big Sound! Class Leading 1500 mW Audio and Full of Great Features The IC-F1000/F2000 series provides class leading 1500 mW loud and clear audio with Icom custom ...

Icom’s A220 panel mount transceiver is a popular fit with experimental and light sport pilots. The TSO approved version will work for all certified part 23 aircraft. This air to ...

Icom’s A220 panel mount transceiver is a popular fit with experimental and light sport pilots. This ground to air transceiver has the capability to work on both 8.33 kHz and 25 ...

Icom’s A120 air band mobile introduces two new features: Active Noise Cancelling (ANC) and Bluetooth® capabilities. The newly added built-in ANC reduces background noise and is ...

The A14 is the ideal flight companion for the student pilot. This radio practically pays for itself by saving pilots both engine hours and fuel during preflight communications ...

The A25 series is a powerful air band handheld with 6 watts of power and an IP57 waterproof rating; weather cannot stop these radios. The handheld includes a large 2350mAh Li-ion ...

The GM800 meets the GMDSS requirements as required for SOLAS regulated commercial vessels engaging in international voyage. The radio also meets the MED, "wheel mark" requirements ...

The GM600 meets the GMDSS requirements as required for SOLAS regulated commercial vessels engaging in international voyage. With the optional PS- 310 DC-DC converter, the GM600 ...

The M605 is not just a radio. It’s a system that allows the user choices on how to set up the radio with up to three stations. Boaters can now add an exclusive complete display as ...

The M506 series gives customers the option of a full featured VHF fixed mount, radio with an integrated AIS receiver or radio with AIS plus NMEA 2000® connectivity. The M506 is ...

The M424G is an enhanced version of the M424 fixed mount VHF/DSC and includes an integrated GPS Receiver, which allows current position and time to be used for DSC calls. With its ...